Motion detector
This accessory detects motion within a 12-meter area and a 140° horizontal angle. With its dual lens, it is not
sensitive to pets lighter than 27 kg within a 7-meter area.
Features
• Self-protection against opening and disconnection
• Approximately one minute of inhibition time after detection
• Test mode available by pressing an indicator light on the front (For optimum battery life, the indicator
does not flash to signal a detect outside of test mode.)
Technical specifications:
Encrypted digital radio transmission
Monitoring of proper operation (radio connection and battery status)
One AA LR6 lithium battery (provided)
Lifetime of three years under normal operating conditions with monitoring (20 detections per day)
Dimensions and weight: L 88 mm x W 66 mm x H 48 mm / 91 g
Installing Your First Accessories
19
Installation tips
• Install the motion detector in a required walkway, such as an entry area or central hallway.
• The detector should ideally be installed in an open space, 2.40 meters from the ground without a swivel
(higher with the use of a swivel)
• Fastening by industrial double-sided adhesive or by four screws (provided)
• Mounting swivel provided
Personalization options
• Sensor name (usually based on its location)
• For each protection level (disabled, partial, or total), select whether the motion detector will detect an
intrusion, what its sound behavior will be (silence, silent beeps, or deterring siren), what types of alerts
will be used (email, text message, or voice call), and what the time delay will be (immediate or after a few
seconds, such as to give you time to disable it from an indoor keypad)
