7
TYPICAL SUMP INSTALLATION FOR SSM33/SSM33I Series
GROUNDED TYPE 115 OR 230
VOLT RECEPTACLE. MIN. HEIGHT
ABOVE FLOOR 4 FEET.
PUMP CORD PLUGS NTO
SERIES WITCH CORD FOR
AUTOMATIC OPERTION.
PUMP CORD CAN BE PLUGGED
DIRECTLY INTO RECEPTACLE
FOR MANUAL OPERATION.
BOTH SWITCH AND PUMP
CORDS ARE 10 OR 20 FT.
LONG AND ARE NO. 16 WITH
TWO POWER AND ONE
GROUND CONDUCTOR.
NSULATION ON 20 FT. CORD
CONDUCTORS AND JACKET IS
UL AND CSA APPROVED.
MIN. SUMP DIA. 14”
1-1/2” CHECK VALVE AND
RUBBER SLEEVE CONNECTORS
1-1/2” SHUT-OFF
GATE VALVE (OPT.)
SUMP BASIN 14” TO 18” DIA.
PLASTIC, FIBERGLASS OR CONCRETE
1-1/2” DISCHARGE PIPING CAN BE ABS OR PVC PLASTIC
WITH PROPER ADAPTERS OR CAN BE GALV. STEEL
IF COPPER PIPE IS USED BE SURE TO USE THREADED
PLASTIC FITTING IN PUMP DISCHARGE OPENING TO
CONNECT TO COPPER PIPE THREADED ADAPTER.
SUMP PUMP MOTOR
TURN OFF LEVEL
LIFTING HANDLE
TURN-ON LEVEL
7-8”
12 - 13”
MIN. 14”
MIN. 10½”
BOTTOM LINE
INLET PIPE
13800A991