MYERS MTS53057 Owner'S Manual Download Page 4

MTS53057 

Rev. 7/27/21

WARRANTY

MTS53057

HEAVY DUTY 1" IMPACT WRENCH

WITH EXTENDED ANVIL

1 YEAR WARRANTY

Myers Tool Supply warrants this air tool for a period of 1 year to the 

consumer. We will repair any air tool covered under this warranty which 

proves to be defective in material or workmanship during the warranty period. 

In order to have your tool repaired, return the tool to any of the Myers Tool 

Supply Authorized Warranty Centers listed, freight prepaid. Please include a 

copy of your proof of purchase and a brief description of the problem. The tool 

will be inspected and if any part or parts are found to be defective in material 

or workmanship, the tool will be repaired free of charge and returned to you 

freight prepaid.
This warranty gives you specific rights. You may also have other rights which 

vary from state to state.
The foregoing obligation is Myers Tool Supply’s sole liability under this or any 

implied warranty and under no circumstances shall Myers Tool Supply be liable 

for any incidental or consequential damages.

Note: 

Some states do not allow the exclusion or limitation of incidental or 

consequential damages so the above limitation or exclusion may not apply to 

you.

MYERS AIR TOOL REPAIR CENTERS

CALIFORNIA

Jack-X-Change
1609 North Orangethrope Way, Anaheim, CA 92801
(714) 871-4966

NORTH DAKOTA

Tool Warehouse
127 West Main Avenue, West Fargo, ND 58078
(701) 282-6151

OHIO

Power Tool Repair
371 West Avenue, Tallmadge, OH 44278
(330) 630-0022

SOUTH CAROLINA

Air & Hydraulic Repair
315 Hawkins Rd, Travelers Rest, SC 29290
(877) 786-3939

TEXAS

VWM Maintenance Solutions
2328 Blanco Rd, San Antonio, TX 78212
(210) 736-4285

WASHINGTON

Universal Repair
1611 Boylston Avenue, Seattle, WA 98122
(206) 322-2726

Summary of Contents for MTS53057











Reviews: