background image

 

 

CTFRP Series Manual                        

Page 7   

6/2013 

 

Limited Warranty 

Myers Power Products, Inc. (Myers) warrants this product to be free from defects in materials and workmanship for a period 
of five years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole 
option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization 
(RMA) number from customer support. Products must be returned with transportation charges prepaid and should be 
accompanied by a brief description of the problem encountered and proof of date of purchase. This warranty does not apply to 
equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This 
warranty applies only to the original purchaser. 

EXCEPT AS PROVIDED HEREIN, MYERS MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit 
limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the 
purchaser. 

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL MYERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Myers is not liable for any costs, such as lost profits 
or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third 
parties, or otherwise.

 

 

 

 

 

 

 

 

 

 

 

Entire contents copyright © 2013 by Myers Power Products, Inc.. All rights reserved. Reproduction in whole or in part without 
permission is prohibited. 
 
 

 

Summary of Contents for CTFRP9003










Reviews: