Transmitter Installation
1)
Remove the rear cover of the Cybex Console.
2)
Locate the CSAFE controller port. Unplug anything that might already be installed to this port.
3)
Plug in the MCC-CX cable into the gray Cybex CSAFE port.
4)
Remove the Velcro backing and install CableSAT transmitter inside the Cybex console.
5)
Plug the other end of the MCC-CX cable into the CableSAT transmitter port Control IN.
6)
Consult your Cybex Operation Manual to set the CYBEX console to CAB mode.
**Before using CableSAT, the TV tuner needs to be scanned to register the set top box on channel 3
CableSAT Transmitter MWCS-T
MCC-CX
***Note: Consult your Cybex Operation Manual to set the CYBEX console to CAB mode.