12
EQ Button
-
Select between 5 preset EQ tones including Flat, Rock, Jazz, Classical & Bass
FITP3 Player Feature:
When the FITP3 Player is docked the MP3 Icon illuminates in the LCD Window
The audio from the Controller regardless of source will be directed to the headphone jack of the FITP3 Player.
Basic Functions
Song Back <<
Song Forward >>
Song Play & Pause
Special Features:
Auto OFF Sensor-
The MYE Controller will monitor for the absence of vibration for 10 minutes. Should this occur, the console will
automatically power OFF saving energy and extending product lifespan. This feature can be programmed enabled or
disabled.
To Enable the Auto OFF Sensor:
1.
Press the “Scan & CC” buttons simultaneously for 3-5 seconds unit the word “OFF” is displayed
2.
Press the “TV” button to turn the feature ON or OFF
3.
Press the “EQ” button to exit
LCD TV Channel Default Feature-
This feature allows the LCD TV to default to a specific TV channel when turned ON. Note: Factory default channel is
‘0’.
To set a default TV Channel:
1.
Press the “1 & 3” numeric keys simultaneously for 3-4 seconds until a flashing channel number appears on the
display
2.
Select the desired default TV channel number by pressing the direct access numeric keys.
3.
Press the “EQ” button to exit. Note: the selected default TV channel number stops flashing and is displayed
briefly to confirm.
IntelliJack / Self Diagnostic Headphone Jack
The IntelliJack self diagnostic headphone circuit detects a faulty headphone jack. When a faulty headphone jack is
detected, a flashing headphone icon will appear in the LCD display and will remain until a new jack is installed and
reset.
To replace the IntelliJack:
1.
Loosen the two screws evenly on the bottom of the IntelliJack module and remove.
2.
Carefully insert new IntelliJack module without bending contact pins
3.
Turn MYE Controller OFF then press the “Power” button for 3-4 seconds to reset fault icon. Note: Headphone
Icon will illuminate for reset confirmation
IMPORTANT NOTICE:
Faulty headphones may trigger the fault icon. It is important to audibly test the headphone
jack prior to replacement. If the headphone jack is deemed OK simply follow step #3 above to reset faulty icon.