Functions
With this TV simulator you can simulate the flicker patterns of a
switched-on television and so as to feign your presence to
potential burglars.
For this purpose
5
different settings are available:
ON: the LEDs light up in different colours and combinations.
DUSK
2
HRS: the LEDs switch on automatically at dusk and then
light up for
2
hours.
DUSK+4HRS: the LEDs switch on automatically at dusk and then
light up for 4 hours.
DUSK+
6
HRS: the LEDs switch on automatically at dusk and then
light up for
6
hours.
OFF: the appliance is switched off.
Setup
Select a suitable location for setting up the appliance.
The TV Simulator should not be directly visible from must fulfill the
following criteria:
STS 12 Al
The flickering generated by the TV simulator must be visible
on the walls and/or ceiling from outdoors.
The TV Simulator must be installed such that it can be influ
enced by the twilight. This means that the fall of light from
outside must be given! It should also be borne in mind that,
the closer the appliance is to a wall, the less light will fall on
the twilight sensor
O
.
The TV Simulator may not be located very near a window
which is well lit from outdoors, such as on a busy street or
next to street lights.
There should be no additional time-controlled light source in
the room, e.g. a night light.
■
7