if you want to have it started immediately.
(11) Don't use the equipment with an empty stomach, and wait for at least 1 hour
after a full meal before starting the course for weight reduction.
(12) When operating, fasten laser pads onto the client first, then turn the equipment
on, and adjust energy level(which should be set from low to high slowly to make
the client feel warm and comfortable
(13) When using this equipment, parts to be treated must be kept moist, so as not to
damage the laser pads.
(14) When using laser pads, its whole surface should contact the skin fully and can’t
only touch a small area.
(15) A better effect can be achieved with the combined use of laser pads with
massage and other equipment.
(16) Laser pads can also be used separately. Just fasten it onto the fat part for about
30 minutes. A better effect can be achieved with the combined use of the hands'
technique.
(17) To clean the equipment with normal saline after the operation to ensure its
cleanliness and hygiene and extend its service life.
(18) To use the equipment and train the operators in strictly accordance with the
instructions specified in the manual.
5. Troubleshooting & Solutions
(1) The equipment can’t be started, and the buttons in its back are not lighting up?
A. Make sure the power cord is plugged into a good power socket.
B. Replace a power cord that has the same voltage and tests whether its power cord
malfunctions.
C. Perhaps the main machine is damaged. But don’t dismantle and repair it yourself.
Please contact the after-sales for the correct treatment.
(2) Laser pads don’t have energy output?
A. Please check whether the connecting wire is properly connected to the main
machine.
B. If the above-mentioned solutions are not working, please contact the equipment
dealer for assistance.
(3) The equipment can be started, but there is an error message on the monitor?
A. Take out the plug in its back, and wait for about 1 minute and re-plug it and
restart the equipment.
B. If the above-mentioned solutions are not working, please contact the equipment
dealer for assistance.
6. FAQs
(1) Q: Does it require repeated treatment?
Summary of Contents for YH-2171
Page 1: ...User Manual YH 2171...