WL-SW5 user manual
18
4.Operating on. Beautician hold the work handle in one hand and place the adapter
on area/point of treatment just ok. Click on"+ - ∏ " , Beautician press control button
on handle once, the handle begin to work.
5. Clean the leftovers with hot towel, use warm towel to clean the work head
aftertreatment.
Cautions:
1.You can use a little gel or other lubricants on the treatment parts, but do
not use too more, preventing the lubricants get into the work head.
3.The adapter is easy wear, please replace after use a period time.
4.The bullet iron pillar inside shockwave handle must replace when the
service life is above two million times.
5.Check the filter cup[5] everyday, if it is full above warning line, please
clean itimmediately.
5.0 Maintenance and repair
5.1 Maintenance
5.1.1 daily inspection
The management must inspect the instruments and components on a
regular basis.
Is there a reliable connection between the power outlet and the ground?
Whether the power line is deformed, broken, etc., can pass the naked eye
inspection, whether the wire has metamorphism, deformation, if some
cases, may be caused by leakage and fire. Please replace the new power
cord immediately.
