mychway SR-VR2012, User Manual, Page: 7 / 17

2. Power on the machine
Connect the power cord, lightly press ON/OFF on the machine to turn it on. Press and hold for
about 2 seconds to turn off the machine.
3. Apply gel for lubrication
ensure that the skin surface has enough gel
4. Adjustment of operating parameters
Adjust energy level according to the situation of skin. (It is recommended that you should use it
from the lowest energy level.)
Mode selection: After the machine is started, turn the ENERGY knob to switch between the A/B
working modes:
(1) Mode A: red light goes on, long press the working button on the handiece, there is constnt
energy output. Release the button, the energy output stops.
(1) Mode B: blue light goes on, long press the working button on the handpiece, energy output
lasts for 1.5 seconds
5. During the treatment
The light at the upper part of the handpiece indicates mode A(red) or mode B(blue).
6. Clean skin
After the operation, clean skin, it is recommended to apply a hydrating mask for 10-15 minutes.
There are two working heads, namely facial working head, eye working head. Treatment on a
single area(eye lines, nasolabial folds) 15 minutes. 30-minute treatment on half of the face and