mychway SM-7005N, User Manual

Page: 29 / 53

instrument. Energy should be slowly adjusted from low level to high level to make the
customer feel comfortable.
18. The working face of the laser applicator must be in full (not partial)contact with
skin during the operation
19. The corresponding frostbite-proof membrane must be applied during the
treatment. Do not perform the treatment on dry skin or let the handle directly touch
skin.
20. Use this machine or train the operators in strict accordance with instructions in
the user manual.
4. Troubleshooting & Solutions
1. The instrument cannot be started, and the button light on the back of the
instrument does not work?
A. Make sure the power cord is connected to the socket with normal power supply.
B. Whether the fuse on the back of the instrument is loose or blown.
2. No RF output from the instrument?
A. Please check whether the cord connects the handle to the machine properly
B. Please check whether the treatment area has been cleaned. Grease or essential oil
products may cause poor contact between the handle and human body to cause this
problem.
3. Weakened RF output?
A. Please check whether the cord connects the handle to the machine properly
B. Please check whether non-conductive grease and other substances are on the
treatment handle, which can cause poor contact between the handle and skin to
weaken the output.
C. Please check whether the handle used is the one specified by the instrument.
4. The machine works for a while but then stops?
A. It may be because there is no strong water flow or the machine doesn’t sense the
presence of water flow.
B. Check whether there is enough water in the water container.
5. There is a red alert on the top left corner of the machine?
A. Please check whether the water level in the water container is low
B. Please check whether there is something wrong with the water container.
6. I can start the instrument, but the screen shows erroneous message?
A. Please unplug the power plug behind the instrument and wait for about 1 minute
before restarting the instrument.
B. If the above method cannot solve the problem, please contact the instrument
dealer for assistance.