mychway LS-78D1MAX, User Manual, Page: 34 / 59

(9) Please turn off the equipment's power switch if no one uses it, and ensure the
main power is off before the exit of related personnel to guarantee the
equipment's safety.
(10) It's advised to stop taking other weight-loss medicines for 1 to 2 months before
treatment if you are taking them now. The course of treatment shall be extended
if you want to start it immediately.
(11) Do not use the equipment with an empty stomach, and wait at least one hour
after a full meal before starting a weight-loss treatment.
(12) When operating the instrument, it should contact the skin thoroughly to avoid
uneven heating.
(13) When operating the equipment, start from the lowest energy level and gradually
increase it after the client gets used to it.
(14) You must keep the treated parts moist and avoid operating the instrument in dry
skin conditions.
(15) Do not set the Vacuum‘s suction too high; otherwise, the skin may feel pain due
to drag.
(16) Remember that you can not use Cavi around the chest or parts with many
skeletons, such as the head, back, and breast.
(17) To not scare the client caused by a sudden stimulation, you should inform him of
the feelings before operating the micro-current with LED.
(18) To shun the air outlet as much as possible when using the cold and hot hammer;
otherwise, the handpiece’s service life may be shortened due to inadequate heat
dissipation.
(19) After the operation, clean the equipment with normal saline to ensure its
cleanliness and hygiene to extend its service life.
(20) Use the equipment and train the operators in strict accordance with the
instructions specified in the manual.
4. Troubleshooting
(1) I can’t start the equipment.
A. Make sure you plug the power cord into a good power socket.
B. Check whether the fuse tube in the back is loose or burnt out.
(2) I can start the equipment, but RF doesn't output energy, or the energy becomes
weak.
A. Check whether the handpiece and the plug connecting to the machine body are
closely linked.
B. The wire inside the handpiece is loose or burnt out.
(3) I can start the equipment, but an error message shows on the monitor.
A. Take out the power plug from the back, wait about one minute, reinsert the plug,
and restart the equipment.
B. If the solution mentioned above doesn’t work, please contact the distributor for