increase it after the client gets used to it.
(11) After the operation, clean the equipment with normal saline to ensure its
cleanliness and hygiene to extend its service life.
(12) You can use the handpieces separately, but you can use them together to achieve
a better effect.
(13) When operating the instrument, it should contact the skin thoroughly to avoid
uneven heating.
(14) You must keep the treated parts moist and avoid operating the instrument in dry
skin conditions.
(15) It's advised to stop taking other weight-loss medicines for 1 to 2 months before
treatment if you are taking them now. The course of treatment shall be extended
if you want to start it immediately.
(16) Do not use RF & Ultrasound on the head, chest, breast, heart, and back.
(17) Use the equipment and train the operators in strict accordance with the
instructions specified in the manual.
4. Troubleshooting
(1) I can't start the equipment, and the indicator lamp doesn't light up.
A. Make sure you plug the power cord into a good power socket.
B. Check whether the fuse tube in the back is loose or burnt out.
(2) The equipment doesn’t have radiofrequency output.
A. Check whether the handpiece and the plug connecting to the machine body are
closely linked.
B. Please check whether the treated parts are cleaned. Grease and oily product or
essential oil may cause poor contact between the handpiece and the body,
resulting in no output.
(3) The radiofrequency’s output becomes weak.
A. Check whether the handpiece and the plug connecting to the machine body are
closely linked.
B. Please check whether there is non-conductive grease on the handpiece, which
may cause bad contact, resulting in a weakened output.
C. Check whether the products in use are the adaptive ones specified by the
equipment
(4) The equipment doesn’t have suction, or the suction becomes weak.
A. Please turn off the equipment and check its specialized filter, which may need to
be replaced.
B. Please check the rubber ring of the handpiece plug because a worn rubber ring
may cause air leakage.
C. Please check whether the oil filter is tightened and whether the rubber ring is
worn out. Air leakage in this place may cause insufficient air pressure.
Summary of Contents for LS-45D2SB
Page 1: ...User Manual LS 45D2SB...