mychway HR-808H, Product Description

Page: 19 / 33

Shaving
1
Adjust operating parameters
3
The operation process
4
Apply cold gel
2
Before operation, a shaving process should
be carried out, and the hair should be kept
1-2mm to facilitate the absorption of light by
the hair.
Apply a little cold gel on the operation area.
The thickness of the coin should not be too
thick, otherwise the effect will be affected.
.According to the guest's skin color, hair thickness
and depilation position, select the corresponding
operation parameters, and adjust them according
to the customer's feeling.
Fit the skin, avoid light leakage, and slowly
slide the handle probe for operation.
Energy regulation: starting from energy 4, if the
operator thinks that the heat is too large, the energy
will be reduced; if there is a slight thermal expan-
sion, it means that melanin is absorbed by the laser
with the wavelength of 808nm, and the light energy
is converted into heat energy to destroy the melanin
of hair follicle, and the effect is the best.
OPERATION STEPS
※
16