mychway DT-GS300, User Manual, Page: 14 / 18

2. No air pressure after turning on the device?
A. Ensure that the power cord is connected to the air pressure suit.
B. Ensure there’s energy flow through the ballon power lines.
3. No heat after turning on the device?
A. Ensure that the power cord is connected to the air pressure suit.
B. Please check if there’s energy flow through the ballon power lines or damage.
C. Contact device distributor for assistance if neither A or B works.
4.The device can be activated, but the wrong information appears on the screen?
A. Please unplug the power plug behind the device and wait about 1 minute before
restarting the device.
B. If the above method did not work, please contact the device distributor for
assistance.
6.FAQs
1. Q: How long is one treatment?
A: It takes around 60 minutes. No complicated procedures are needed in the process. The ideal
time for one treatment is 45-60 minutes.
2.Q: How often to have one treatment for better results?
A: It is advised to do it 2-3 times per week. Adopting the unique design of low
voltage h air pressure system, it makes the human body sweat through the
heat energy effect. Following three steps of warming up, air pressure massage,
sweating, it helps to export body toxin and excess water together with sweat excretion,
so as to achieve the effect of detoxification and fat reduction.
3.Q: Why do I sweat during the process?
A: Massage through high temperature and air pressure circulation: it can cause
heat-up of human body, pore dilation, promote blood circulation, in a way making
human body exercise passively, and muscle will consume the energy stored inside the
body and produce a lot of heat. Because the body needs to sweat to send out
excessive heat, which is a normal "reaction phenomenon". Exporting toxins build up in
the body can cause sweating.
7. Packing List
1 x Host