3
Step 1:
Step 3:
Step 2:
Attach metal tray brackets.
Square holes face the floor.
This will be important when
installing casters.
Align the side frames with the
metal tray brackets as
shown. Casters will install
once the holes are aligned.
The nut on the caster
assembly will fit into the
punched square hole on the
bottom metal tray bracket.
There are threaded inserts in
the bottom of the seat that
will align with the holes in the
metal frame. Use provided
hex bolts to attach. Next
install plastic caps on open
tube frame ends.
Step 1:
Step 3:
Step 2:
Attach metal tray brackets.
Square holes face the floor.
This will be important when
installing casters.
Align the side frames with the
metal tray brackets as
shown. Casters will install
once the holes are aligned.
The nut on the caster
assembly will fit into the
punched square hole on the
bottom metal tray bracket.
There are threaded inserts in
the bottom of the seat that
will align with the holes in the
metal frame. Use provided
hex bolts to attach. Next
install plastic caps on open
tube frame ends.
Step 1:
Step 3:
Step 2:
Attach metal tray brackets.
Square holes face the floor.
This will be important when
installing casters.
Align the side frames with the
metal tray brackets as
shown. Casters will install
once the holes are aligned.
The nut on the caster
assembly will fit into the
punched square hole on the
bottom metal tray bracket.
There are threaded inserts in
the bottom of the seat that
will align with the holes in the
metal frame. Use provided
hex bolts to attach. Next
install plastic caps on open
tube frame ends.
understood by the operator that common sense and caution are factors which
cannot be built into this product,but must be supplied by the operator.
•
WARNING: Do not stand on Seat Pad (A) or Plastic Trays (B).
Maintenance and Repair
• When servicing, use only identical replacement parts.
• To clean, wipe down with dry or slightly damp cloth. Do not use solvents, as this
can damage the upholstery. Be sure to wipe off oil and other fluids when finished
using.
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of
this document including all text under subheadings therein before set up or use of this
product.
NOTE: Requires 17mm socket or wrench and hex wrench.
ASSEMBLY INSTRUCTIONS
Step 1:
Step 3:
Step 2:
Attach metal tray brackets.
Square holes face the floor.
This will be important when
installing casters.
Align the side frames with the
metal tray brackets as
shown. Casters will install
once the holes are aligned.
The nut on the caster
assembly will fit into the
punched square hole on the
bottom metal tray bracket.
There are threaded inserts in
the bottom of the seat that
will align with the holes in the
metal frame. Use provided
hex bolts to attach. Next
install plastic caps on open
tube frame ends.
Step 1
Snap metal tray brackets. Square
holes face the floor. This will be
important when installing the casters.
Step 2
Align the side frames with the metal
tray brackets as shown. Casters will
install once the holes are aligned.
The nut on the caster assembly will
fit into the punched square hole on
the bottom metal tray bucket. Do not
overtighten caster.
Step 3
There are threaded inserts in the
bottom of the seat that will align with
the holes in the metal frame. Use
provided hex bolts to attach. Next,
install plastic caps on open tube frame
ends.
