32
INSTALLATION, WIRING & PROGRAMMING GUIDE
REQUIRED PARTS FOR
EVO-ONE
INSTALLATION
MyCar Telematics device
HRN-MCAR-01
EVO-ONE
HRN-LLRS-01
STEP 1. CONFIGURE THE REMOTE STARTER
The Fortin Flashlink is required to properly configure the EVO-ONE remote starter to accept the MyCar tele-
matics device. When flashing the EVO-ONE remote starter,
please ensure to choose the following options:
Toggle your Flashlink connection mode to “Remote-Starter”. From the top menu click on “Configura-
tion” and then on “Unit Options”. In the “RF Kit Compatible” section, check the box next to “Fortin 2”
and click the save button on the top right of the screen.
STEP 2. CONNECT
(1)
Connect only when remote starter is not supplying power to telematics device
3
(+) HORN (PULSE)
OR
(+) SIREN (CONSTANT)
ANALOG INPUT SIGNAL
FOR ALARM DETECTION
(+)
12V BATTERY
(1)
GROUND
(1)
+12V Ba
tt
ery
(RED
)
Gr
ound
(BLA
CK
)
Da
ta
(WHITE
)
Da
ta
(BL
UE
)
Alarm(+)
(YELL
O
W
)
Installation:
Place module 3 inches
(minimum) from any metal surface
Orientation:
Horizontal; small door
facing upward (as seen in this diagram)
HRN-LLRS-01