5
Fig – 1.5
2. Wi-Fi SETUP:
Alexa requires internet connection to work so STB should be
connected to a Wi-Fi internet connection, a Wi-Fi connection can be
from mobile hotspot or Wi-Fi router.
STEPS:
a. Press Menu key on the BLE Remote.
b.
Press left/right to highlight “Alexa Settings” menu.
c.
Press up/down to highlight “Wi-Fi Search”.
(See Fig 2.1)
d.
Press OK/select key on “Wi-Fi Search”.
e. Wi-Fi
menu with different scan options will be displayed.
f.
Press OK/select key on “Network Scan”. (See Fig 2.2)
g.
All the scanned Wi-Fi SSID will be listed, highlight your Wi-Fi
name. (See Fig 2.3)
h.
Press OK/select key to Connect.
I.
If Wi-Fi network is open, connection will be initiated
automatically, otherwise OSD for password entry will be shown.
j.
Enter the password by navigating (left/right/up/down) on the
QWERTY keypad shown. (See Fig 2.4)
k.
Press Green key to connect after
password entry.
l. On successful connection an OSD
with “Wi-Fi Device Connected”.
(See Fig 2.5)
m. Please repeat the steps on failure.
NOTE: Please connect the STB to
Wi-Fi source which is free of firewall
or any limitations.
Fig – 2.1
