I N S E R T I N G
1.
1. Insert pre-selected wire
into
Wire Snatch
2. Insert document from
last pages to first
pages then insert front
cover.
The back cover should
be inserted last with
inside facing up.
3. Take out inserted
document from
Wire Snatch
to close
the wire.
The seam of closed wire should be inside the book.
Follow step No.2 instruction for best results.
TIPS
Last Page
Back Cover
Back Cover
Front Cover
Front Cover
1. Put inserted document
into
Wire Closer
.
The wire element must
stand horizontally at
the bottom of
Wire Closer
.
2. Pull
Closer Handle
forward to close.
3. Take out document
and turn back cover
over. The binding is
complete.
OK
The seam of closed wire should be just touching.
Slightly adjust the
Closer Control
a little left or
right for the under-closed or over- closed seam.
TIPS
C L O S I N G
1.
2.
3.
SO
90
02
PR
O
JE
C
T
2.
Front
Cover
Back
Cover
3.
Back
Cover
1. Align sheets as indicated on punch throat ruler. Make sure all dies disengagement pins are pushed in. Insert
sheets and press Foot Pedal to punch the left part first.
See Picture 1
2. Remove sheets and flip them over as illustrated.
See Picture 2
.
3. Insert sheet from right-hand-side. Press Foot Pedal to punch.
See picture 3. IMPORTANT:
Document must be
inserted in such a way as to place one of the already perforated holes onto the
Continuous Punch Guide
.
1.
3.
2.
14"
Longer
14" Longer
FOR PUNCHING DOCUMENT LARGER THAN 14" (356MM)
14" Longer
"
14" Longer
1
7
8
"
"
7
"
"
"
"
2
1
3
:
"
1
"
"
7
"
"
"
"
2
: 1
3
: 1