background image

BOOKLETMAKER FOLDNAK M2

 

                                                                                                                                                                                                                       

9

6. MAINTENANCE

Replace scratched or bent driver blades (16). Clean the machine only with a soft and
humid tissue without chemical substances. Clean the folding rollers using a substance
that does not dissolve rubber.

7. SECURITY

 

The machine must only be used for the stapling and folding of paper.

 

Connect machine only to an earthed power outlet. Switch off after use.

 

Make sure that the power requirement indicated at the machine’s rear side is the
same being provided on your premises before connecting the power cord. Check
function of safety shut off regularly: The machine must not run with cover (5)
opened.

 

Clean and service the machine only with the power cord disconnected.

 

Place on an even support and never in a humid surrounding, avoid direct sunlight
immission.

 

Never put mugs, glasses or bottles onto the machine.

 

If you notice smoke, heat, excessive noises or any unusual performance, discon-
nect the power cord immediately and call your dealer.

Summary of Contents for Standard M2
















Reviews: