25
9. STANDARD FOLDING OF STANDARD PAPER
Check the finish of test folding.
Check for folding misalignment using the second test
folded sample.
If folding problems occur, refer to the following pages
according to the folded state.
Folding misalignment along the vertical
length of the paper ................................... (
☞
p.27)
Folding misalignment along the sides of
the paper ................................................. (
☞
p.26)
Deformed folding ..................................... (
☞
p.31)
10
<Normal folding>
<Folding misalignment
along sides of paper>
<Deformed folding>
<Folding misalignment along
vertical length of paper>
Select the method of using the counter.
The counter can be used in two ways: subtract count and add count.
Enter the number of sheets to be processed using the numerical keys first before beginning operations. In this case, the
counter will be set to the subtract count method. (A period is displayed at the bottom right where the count is displayed.)
If the clear key is pressed to clear the counter to “0” before beginning operations, the counter will be set to the add count
method.
Up to four digits (9999) can be displayed.
11
The following description is based on the subtract count method.
<Counter display for “Subtract count method”>
<Counter display for “Add count method”>
Period
Press the numerical keys to enter the
number of sheets to be processed.
12
Press the start key to start folding.
To cancel operations halfway through, press the stop
key. Pressing the start key another time resumes
operations.
When the number entered is reached in folding
operations, the buzzer sounds “pi...pi...”, and paper
feed will stop automatically.
If the paper feed tray runs out of paper, the buzzer
sounds “pi.pi.pi”, and the unit will stop automatically.
13
