MYAIR
Plasma Car Ionizer
HOW TO INSTALL FILTER
1.
Open the filter cover and pull the cord out.
2.
Place the filter with the black side facing the Air Inlet.
USING THE APPLIANCE
1. Charge the appliance for at least 8 hours before using it for the first time.
2.
Open the bottom filter lid to install the filter with the black activated carbon side
facing the air intake, then close the lid.
3.
Press “Air Purify” to activate the device. A green working light indicates the
device is in purification mode. It will stop automatically after 60 minutes.
4. To turn off the device, press “Air Purify” again. The green working light is now
turned off and the device will shut down after 10 minutes.
5. Press “Disinfector” to put the device in disinfection mode. A blue working light will
be turned on. The disinfection will take 30 minutes. After 30 minutes, the device
will switch to the “Air Purify” mode automatically for another
30 minutes before shutting down on its own.
6.
To turn off the device while in “Disinfector” mode, press the “Disinfector” and the
blue working light will be turned off. The device will shut down in 10 minutes.
7.
Recharging the device is required when the power indicator light turns green or is
dimly lit.
