HomeGro RDWC User Guide
Programming Timer
• [+] or [–]: Increase or Decrease time setting
• RND: Press Random ON/OFF setting to
activate random delay for start or finish of ON
periods.
• RST: To reset, press reset key with pointed
object, i.e. pencil. (Reset Timer before
programming first time.)
• CTD: Countdown indicates time left before
appliance is turned off.
• MANUAL: Manual override If programming is
interrupted for more than 10 seconds while
setting Timer, unit will automatically revert to
default mode. Preset time will be preserved.
Setting Time:
1.
If display does not appear, plug unit
into wall receptacle and charge battery
for 1 hour.
2.
Remove unit from wall to begin
programming.
3.
Press and hold TIME key. Select 12 or
24 hour display.
4.
Press and hold SET key.
5.
Press [+] or [–] keys to select current
day.
6.
Press the SET key again until hour
display flashes.
7.
Press the [+] or [–] key to select hour
(AM or PM).
8.
Press the SET key again until minutes
display flashes.
9.
Press [+] or [–] keys to select minutes.
10.
Press SET key. Time is now set.
Programming On/Off Settings (max 20 events)
1.
Clock time must be set before
programming ON/OFF times.
2.
After clock has been set, press [+] key.
Display will look as shown in Fig.1,
indicating PROG1 ON setting.
3.
Press SET key. Use [+] or [–] keys and
select block of days. Options are: - MO
TU WE TH FR SA SU - Individual day of
the week - MO TU WE TH FR (Weekdays
only) - SA SU (Weekends only) - TH FR
SA - MO TU WE - TU TH SA - MO WE FR
4.
Press SET key again to select hour, using
[+] or [–] keys.
5.
Press SET key again to select minute,
using [+] or [–] keys.
6.
Press SET key again then press [+] key.
Display will look as shown in Fig. 2,
indicating PROG1 OFF setting.
7.
Repeat steps 3 thru 5 to set day(s) and
time device should turn OFF.
8.
To set additional ON/OFF cycles,
(maximum 20 events), press [+] key.
Then press [+] or [–] keys and follow
procedures in steps 3 thru 5 for each
new ON/OFF event. When finished,
press TIME key. Display will show
current time.
Deleting Programs
1.
Press [+] key. Use [+] or [–] keys to
select ON/OFF event to be deleted.
2.
Press SET key to select event. Press
MANUAL key to delete program setting.
3.
When done, press TIME key to return to
current time and day