My Sodapop Sharon UP, Instruction Manual

Page: 36 / 83

36
HOW TO USE:
CO2 cylinder installation:
1. Take your mySodapop Sodasystem and CO2 cylinder out
of the box.
2. Turn the machine until the backside faces you, then pull down
the snap-lock to remove the back cover for ease of access.
3. Remove the seal and cap from the CO2 cylinder.
Remove the shipping-protection from the pressure-valve.
Insert CO2 cylinder from the backside, into the opening of the
hollow space at the base of the machine, and turn the CO2
cylinder clockwise, while applying gentle pressure until it is firmly
held in place. Hand-tighten only, do not use tools.
4. Ensure that the cylinder is firmly screwed into the valve at the
top and properly in position.
5. Put the back-cover back on the machine. You are now ready to
produce homemade soda.