page 5
1. Line up the rear wheel assembly with
the back legs of the pushchair, so that
the frame ‘LOCK’ (A) and the ‘BRAKE’
pedal (B) will be able to connect.
2. Push the wheel assembly onto the
back leg until the spring pins (C) click into
place.
3. Place the ‘BRAKE‘ pedal (D) into the slot on the frame ‘LOCK‘ (E).
4. Insert the locking pin (F) into the hole on the side of the frame ‘LOCK’ and push it all
the way through to connect the ‘BRAKE‘ pedal to the frame ‘LOCK’.
5. Thread the locking ring (G) through the hole on the end of the locking pin.
Rear wheel assembly
A
B
C
F
E
D
G
click
Summary of Contents for Sienta Duo
Page 2: ......
