3
Assembly
Page 5
1.
Unpack all contents and check that all parts are present before starting
assembly. Please refer to parts list.
Place walker (A) on a solid flat surface with bottom of base facing upwards.
Insert the pins of the universal wheels (F) into their housing located at the front
of the walker. Press until they click into place.
Insert the directional wheels (E) into their housing located at the rear of the
walker. Ensure to align shape of mount with housing before inserting wheels.
Press until they click into place. Pull on wheels to ensure they are properly
inserted.
WARNING! Ensure you have installed wheels correctly before continuing.
x2
universal wheel
directional wheel
x2
2.
Align the anti-slip pads (D) to their attachment points on the baby walker
base. Insert screws (G) into located hole and tighten screw with a screw driver.
Repeat until all 6 anti-slip pads are assembled.
anti-slip
pad
x6
