My Child Expanda, User Manual

Page: 8 / 12

page 7
F
Installing the car seat
(continued)
NOTE: The seatbelt buckle should not
foul, jam or wedge itself under the lap
belt guide, as shown opposite.
Removing the seat cover
The seat cover is a safety feature. Never
use the child car seat with out its cover.
Removing the headrest cover:
Remove the headrest cover (A), by
holding the elasticed band and pulling
the cover forward and off.
Removing the seat back cover:
Remove the four pins (B) securing
the seat back cover (two pins each
side of the seat back). Place the pins
somewhere safe for later. Pull the
cover up from the base of each side
protection system (C) and remove.
Removing the seat base cover:
Remove the two plastic belt guides (D)
on each side of the seat base, carefully
ease them off sideways, and store for
later.
Unfasten the Velcro
®
tab at the back of
the seat on the base cover, pull up the
front of the base cover (E), then pull up
the back of the base cover (F), pulling it
over the armrests and sliding it off.
B
A
C
C
F
E
D