page 10
Adjusting the harness height
(continued)
Pull and hold the shell forward.
Unhook the straps at the rear of the seat
shell by sliding the straps through the slits
in the shoulder pads connector (D) and
yoke (E).
NOTE:
The thinner straps are the shoulder
pad straps, and they connect to the
shoulder pads connector (D) and the
wider straps are the shoulder harness
straps, and they connect to yoke (E).
D
E
Remove the installation bar (B) by
pulling the lock (C) up, on the top right
hand side of the shell.
C
B
