page 7
Installing using the vehicle’s 3-point seatbelt
Place the child car seat into a suitable
passenger seat (see “positioning the
seat” page 5).
Unlock both the upper (B) and lower (C)
shafts and remove them.
Tilt the seat shell forwards (D), feed the
seatbelt between the seat and the base
and plug the buckle in ensuring the
seatbelt is not twisted.
Push the child car seat back into the
passenger seat ensuring a good fit.
Thread the horizontal lap belt section
under both hooks (E) and remove all
the slack by pulling up on the diagonal
section of seatbelt. Thread the diagonal
section through the lock off device (F)
that is nearest to the seatbelt.
D
E
F
B
C
Adjust the shell to its most reclined
position.
Squeeze the recline adjuster handle (A)
under the front of the shell and whilst
holding it, pull the shell forwards to its
most reclined position.
A
click
