My Audio MA Splash, User Manual

Page: 7 / 30

time, the system starts recording. The recording time is 10% longer than the set replay time. After the record ends, the icon will change to , therefore, the system starts
repeating
„Follow & Replay 
Follow & Record
‟ according to the set repeat time. During the whole process, you can press
to return to the replay mode.
d) When the system has finished follow and replay, you can press to enter Contrast Replay, the icon for it is . After the replay, the icon changes to , which means it is
playing the one recorded just now; therefore, the system
starts repeating „Replay 
playing follow reading record
‟. During this process, press
, the system will return to Follow,
and press to start a new replay mode setting.
e) Press M t o exist from Replay interface and return to music playing interface.
2. Replay Times: press and to set the time: 1-10, the default is 5. Press M to return to playing interface.
3. Replay Interval:
set the interval time between two replay, 1
－
10s, the default is 1s.
Movie
1. Press M and enter the following interface, you can refer to the music playing interface for the illustration of this interface. And press M to begin playing videos.
2. Support breakpoint playing.
Menu
Press M to pop up the menu during stopping interface, which includes: Local folder, Card folder, Delete file, Delete All, Repeat and exit . Functions and operation are the same as that of
Music .
Record
Select Record and press M to enter the recording interface.
Recording Interface
1. Press to start/pause/continue recording.
2. Long press to save the recording and be ready for the next recording.
3. Long press M, the system will save the current recording and exit to the main interface.
4. The recording file will be automatically saved to < Music-Record >.
Menu
Press M to pop up the menu, which includes: Local folder, Card folder, REC type, Record form, AVR mode, AVR level, AVR delay and exit.
Notes:
a) In pause status, if low battery, the system will automatically save the recording and return to the record interface.
b) The
system will prompt” Space is full!” when disk is full.
Local folder : to see and choose where to keep the current recording file.
REC type : wav. Bit rate: 32K/64K/128K/256K.
Record from : to choose recording sources, audio input and microphone.
AVR mode : normal and AVR mode. AVR mode can be sonic control, when the volume of the recording source becomes faint and has been kept that situation for some time, t he system will
automatically pause recording until the volume returns to the threshold for recording again.
AVR Level : to adjust sensitivity towards recording voice source. The larger the number is, the less sensitive the recording system is. The default is 5.
AVR delay : to adjust mute time: 1-10s. e.g. 10 means the system will sto
p recording if there isn‟t any voice source in 10 sec. The default is 3 sec.
Current folder
File format
File name
Recording time
Total recording file no.
Remaining recording time
MIC
Progress bar for the remaining recording time
Record/stop recording