EG74 | Raw Dawg
™
Overdrive
3
Basic Operation
1.
Run an instrument cable from your guitar to the EG74’s
INPUT jack and another instrument cable from the EG74’s
OUTPUT jack into your amplifier’s input.
2.
Start with all knobs set to 12 o’clock.
3.
Turn the effect on by depressing the footswitch.
4.
Rotate OUTPUT knob clockwise to increase overall
volume of effect or counterclockwise to decrease it.
5.
Rotate TONE knob clockwise for a brighter sound or
counterclockwise for a warmer sound.
6.
Rotate DRIVE knob clockwise to increase amount
overdrive or counterclockwise to decrease it.
The Raw Dawg
™
Overdrive is powered by the
Dunlop ECB003 9-volt adapter or the DC Brick
™
,
Iso-Brick
™
, and Mini Iso-Brick
™
power supplies.
This pedal cannot be powered by a battery.
Power
Directions