M251 | FOD
™
Drive
4
Basic Operation
1. Run a cable from your guitar to the M251’s INPUT
jack and run another cable from the M251’s OUTPUT
jack to your amplifier.
2. Start with all controls at 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Rotate BLEND knob clockwise for more of the
High Gain sound or counterclockwise for more of
the Crunch Gain sound.
5. Rotate OUTPUT knob clockwise to increase
overall volume or counterclockwise to decrease it.
6. Set the SCOOP switch to the UP position for a flat
midrange, MIDDLE position for boosted midrange,
or DOWN position for scooped midrange.
7. Rotate GAIN knob clockwise to increase intensity
of High Gain circuit overdrive or counterclockwise
to decrease it.
8. Rotate TONE knob clockwise for a brighter sound
or counterclockwise for a warmer sound.
9. Note factory setting of internal CRUNCH GAIN
knob in case you wish to return it to its original
position. Rotate clockwise to increase intensity
of Crunch Gain overdrive or counterclockwise to
decrease it.
10. Note factory setting of internal CRUNCH
VOLUME knob in case you wish to return it to its
original position. Rotate clockwise to increase
volume of Crunch Gain circuit or counterclockwise
to decrease it.
The FOD
™
Drive is powered by one 9-volt battery
(remove bottom plate to install), the Dunlop ECB003
9-volt adapter, or the DC Brick
™
, Iso-Brick
™
, and
Mini Iso-Brick
™
power supplies.
Power
Directions
