10.1” HD QUAD LCD MONITOR
12
SPEED SWITCH
The orange wire needs to be connected with the vehicle’s tacho signal and via MENU the
SPEED SWITCH needs to be selected ON. At FREQUENCY 67Hz setting (and the most common
used tacho signal) the selected camera will be displayed during a speed of 0~33km/h.
Select the concerning camera via『UNDER FREQUENCY CAM』 (At a different type of tacho
signals the FREQUENCY needs to be adjusted higher or lower than the example)
Over 33km/h (72Hz) the selected camera will be switched OFF automatically. When the speed
slows down, then the selected camera will be switched ON automatically again at 30km/h.
Instead of automatic switch OFF at a speed over 33km/h it is also possible to activate another
video source, such as a navigation picture from an optional navigation computer.
In this case user needs to select 『OVER FREQUENCY DISPLAY: ON』 and user needs to select
『OVER FREQUENCY CAM』
In case of TRIGGER activation during 『SPEED SWITCH ON』 mode,
then TRIGGERS 1 ~ 4 will overrule the 『SPEED SWITCH』 function.
SYSTEM SETTINGS
SPEED SWITCH
FREQUENCY
UNDER FREQUENCY CAM
OVER FREQUENCY DISPLAY
OVER FREQUENCY CAM
OFF
67Hz
CAM3
OFF
CAM1
