MX Neptune Showers Solo Installation Instructions Manual Download Page 6

GUARANTEE

The MX Group guarantee this product for a period of one year, 
from date of purchase, against mechanical and electrical defects 
arising from faulty materials or from poor workmanship, providing 
the product has been installed by a competent person in 
accordance with the fitting instructions.

The MX Group  undertake to repair or replace, at their discretion, 
without charge, provided the product has been properly maintained 
and operated in accordance with the operating instructions. 
Any component found to be defective during this period, as the 
result of misuse or damage, or the effects of scaling, will not be 
covered by this guarantee.

This product must not be modified, repaired or taken apart except 
by a person authorised by The MX Group.

This Guarantee is only valid within the United Kingdom and does 
not cover product used commercially.

This Guarantee does not affect your statutory rights.

The MX Group

Alpha Close, Delta Drive, Tewkesbury Industrial Estate, 

Tewkesbury, Glos. GL20 8JF

Telephone: 01684 293311 Fax: 01684 293900

ATTENTION!

Do not operate the shower unit if the sprayhead or 
hose becomes damaged.

Warning:

 If re-starting the shower immediately after 

stopping, be aware that a slug of hot water will be 
expelled for the first few seconds.

Summary of Contents for Neptune Showers Solo







Reviews: