17
Modification reserved
•
19, rue de Rennes
•
BP 83221 • F - 35690 ACIGNÉ
13.1
Hitch up the implement (refer to the section "Hitching a front
implement" in this manual).
13.2
Connect the PTO shaft to the front power take-off.
The engine must be stopped.
13.3
The power take-off is engaged and disengaged by pressing
the switch located in the cab.
The engine speed must never exceed 1200 rpm when
starting up the power take-off.
13.4
Increase engine speed to 2100 rpm in order to attain
the rotational speed required by the implement (i.e. 1000 rpm).
13.5
After using the power take-off, disengage it using the same
switch located in the cab.
14.
ADDITIONAL FRONT HYDRAULIC LINE*
This supplies a hydraulic unit in front of the linkage.
14.1
Connect the hydraulic hoses of the implement to the 1/2" female
couplings. Release the pressure in the hydraulic system to
make connecting the hoses easier.
14.2
Control the hydraulic line using the tractor’s control valve
or the MX control valve (refer to the "control" section).
* According to equipment
Caution
This operation must be carried out by the driver who must leave the seat and
avensure all manoevres are forbidden while he is working on the front linkage
.
Checking before work
—
Check that the tractor, implement and transmission shaft interact correctly throughout the full lifting stroke before
engaging
the power take-off.
