8
SETTING THE CLOCK AND ADJUSTING THE DATE
The clock of this device is designed to indicate the hours in 12 or 24 hour
format and the date in "month / day" mode. To set the date and time, proceed
as follows:
With the blood pressure monitor turned off, press and hold the " " and
M
buttons for three seconds at a time. The digits of the time format will blink
(Fig. 1).
1.
Press the
M
button successively and select the time format.
2.
Press the " " button and the corresponding year digits will blink (Fig. 2),
3.
Press the
M
button to select the year.
4.
Press the " " button and the month digits will blink (Fig. 3).
5.
Press the
M
button repeatedly and select the month.
6.
Press the " " button and the digits for the day will flash (Fig. 4).
7.
Press the
M
button to set the day.
8.
Press the " " button and the corresponding hour digits will blink (Fig. 5).
9.
Press the
M
button to set the hour.
10.
Press the " " button and the minute digits will blink (Fig. 6)
11.
Press the
M
button to set the minutes.
12.
Press the " " button again to store the data.
