MWR Clairvoyant1002, Quick Installation Manual, Page: 6 / 31

User’s Guide
6
Important Notice
1. The Clairvoyant1002 is for indoor use. Note that the CMOS sensor
inside the product can be damaged permanently if the camera lens is
exposed to direct sunlight. If your application demands prolonged
exposure to sunlight, you should consider equipping it with a sun visor.
2. The Clairvoyant1002 is not weatherproof. You should consider the
environmental specifications that are included in this manual. If you
want to use your camera outdoors, you should equip the camera with a
weatherproof case to protect it from water, moisture, or extreme
temperatures (higher or lower than the specification). For
Clairvoyant1002 cleaning, gently wipe the outside with a clean dry cloth.
3. Be sure to use the DC power adapter that is provided with the camera.
Connecting a Clairvoyant1002 to other power source will cause damage
to the camera.
4. Be gentle in handling the Clairvoyant1002. The glass lens may be
defocused or even scratched if the camera is dropped or mishandled.
5. The Clairvoyant1002 is equipped with metal wall mount (Beware sharp
edge may cut your fingers). When installing the camera, be sure it is
attached firmly to obtain best quality images. Better to locate the camera
where children cannot reach it.
6. If the Clairvoyant1002 does not operate properly, please contact MWR
Engineering or local distributors for service. Do not disassemble the
product or the warranty may be voided.
7. Camera surveillance laws differ for each country. Please contact local
authorities first to avoid any surveillance law violations and to apply for
authorized purposes, if necessary.
8. The manufacture or the seller of this device(s) cannot be held liable
under any circumstances if the device(s) is used for illegal purposes,
offenders are subject to severe legal punishments by government law
enforcement agencies.