I have sound issues
If you experience sound issues when using Phase, check the following points:
- If the audio track seems to be playing a little bit slowly: check that the Receiver is truly plugged to the CD/
Line inputs of your DVS interface.
- If you hear crackles in the sound or experience any latency: try using a different RCA cable to make sure
yours is not defective.
- If the audio track plays in reverse: check the connectors of your RCA cables to make sure everything’s in
order.
I have latency issues
If you experience latency issues when using Phase, check the following points:
- Unplug the USB cable then plug it back in to reset the Receiver.
- Check the audio buffering size on your DJ software.
- Turn your DVS interface/mixer off and back on to reset it.
- Check that your computer has enough battery to work with your DJ Software.
FAQ
•
How do I plug Phase into my DVS setup?
•
How long does the battery last?
•
How do I turn on Phase?
•
What type of records can I use with Phase?
•
How do I know when a Remote battery is empty?
•
How does Remote pairing work? (For when you have more than 2 Remotes).
•
With which software can I use Phase?
•
How do I recharge the Remotes?
•
Is Phase sensitive to external disruptions (like rumble for example)?
•
Will I need to buy additional cables or anything else?
•
How do I make sure to maintain the Remotes on the record?
•
What is the purpose of 4 Remotes and 1 Receiver with the Phase Ultimate bundle?
•
Is it possible to use 1 Receiver with 4 Remotes on 4 turntables simultaneously?
•
Is it possible to change the LED color on the Remotes?
•
I have an issue with the configuration software
How do I plug Phase to my DVS setup?
The Phase Receiver has two audio outputs (one for each deck) that need to be linked to the Line audio
inputs of your DVS interface. Your DVS interface can be either a DVS integrated mixer or an external DVS
interface (sound card).
Step by Step:
Phase and mixer with integrated DVS
1. Connect the Phase Receiver to a power source for power it on (computer, power outlet...)
2. Connect the Phase Receiver to your mixer through the line outputs using RCA cables
3. Place the Phase Remotes on top of your records. You are now all set and can use Phase!
