MWf MF-60, User Manual

Page: 6 / 23

OPERATING INSTRUCTIONS
Switch the detector on by pressing the power button while holding the detector away from any
metallic objects. To avoid cancelling out the target, do not turn on the Metal Detector while it is
adjacent to the target.
The white LED Light will illuminate when the GP- POINTER is on and this light will remain on until
the power button is pressed again to switch off the unit. This mini flashlight feature is useful
when operating in low light situations.
The MF 60 is a non-motion, all-metal detector. This enables you to remain stationary over a
target with continuous audio and vibration response. As the Metal Detector is moved in closer
proximity to a metallic target, the rate of pulsing audio and vibrations increase
proportionally-allowing precise pinpointing of the target.
Operation is completely automatic. All metals will be detected including ferrous and
non-ferrous.
Basic Recovery Method:
Once you have located a target with your ground search metal
detector, dig the recovery hole or remove the plug of earth
Page
5