14 / 21
BETA series
Model:
BETA 12K WIFI
BETA-user manual-EN-R1 27.07.2020
Obrázek nejde
zobrazit.
When you insert the batteries for the first time in the remote controller or if you change them, you can program the
remote controller of only cooling or cooling and heating.
▪
Long press MODE button over 5s to get into the change mode within 3minutes.
▪
P
ress MODE button to change COOL or HEAT.
•
If you adjust the remote controller in cooling mode, it will not be possible to activate the heating function in units
with heating pump. You need to take out the batteries and repeat the procedure described above.
7.3.
O
PERATION
When you insert the batteries for the first time in the remote controller or if you change them, you can
program the temperature display switchover function between °C and °F.
•
Long press TURBO button over 5s to get into the change mode within 3minutes.
•
Press TURBO button to change °C and °F.
1.
Direct the remote controller toward the Air conditioner
2.
Check that there are no objects between the remote
control and the signal receptor in the indoor unit.
3.
Never leave the remote controller exposed to the rays of
the sun.
4.
Keep the remote controller at a distance of at least 1m
from the relevision or other electrical appliances.
8.
D
EVICE FUNCTIONS
The air sucked by the fan enters from the frill and passes through
the filter, then it is cooled/dehumidified or heated through the heat
exchanger.
The direction of the air outlet is motorized up and down by flaps,
and manually moved righ and left by the vertical deflectos, for
some models, the verical deflectors could be controlled by motor as
well.
