6
M1.2.HNFJ2T.NLFREN 13022017
EN
1 Safety
1.1 General safety rules
• The jack is only designed for lifting the load and supporting the load when an additional high strength
bolt is used.
• Visually and operationally inspect jack before each use; do not use the jack if damaged.
• Warning
: if any part of jack fails to work properly, discontinue and have repaired.
• Warning
: Never attempt to repair jack while jack is under load.
• Warning
: Ensure jack to connect and support on suitable base (at least a 400 x 300 dimension with
enough strength) so it will not slip or shift during operations and load is properly supported at lift point to
prevent shifting.
• All persons shall be clear of load being raised or lowered. Never work under a raised load unless using
additional supports and insert ½” bolt (not included) through hole in steel beam immediately below lifting
mechanism (to act as a safety pin).
• Warning
: never exceed the rated load.
• Jack must have a 75 kg load or more to activate the lowering step by step, otherwise lifting beak will drop
suddenly.
• Use hand power only, do not use additional devices on handle to provide extra manpower.
• Do not use the jack for purpose other than for which it is designed.
• Front and back of the rail must be kept rust free, do not use it when rusting happened.
• It is necessary that the operator can watch the lifting device and the load during all movements.
1.2 Safety rules during the use of the jack
•
Ensure jack to connect and support on suitable base (specified in 1.1).
• Ensure the vehicle hand brake is engaged, engine is switched off and transmission is in gear (or “PARK” if
automatic).
• Ensure minimum distance of 0.5 m between vehicle and static objects such as doors, walls, etc.
• Check the lifting point is stable and correctly positioned on the lifting beak.
• Do not allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.
2 Technical specifications
Model
HNFJ2T
Lifting capacity
400 kg
Lifting range
130 to 1325 mm
Maximum supporting load
(additional high strength bolt
is used)
130 < H < 300
2000 kg
300 < H < 500
1600 kg
H > 500
500 kg
Weight
16.25 kg
copyrighted
document
- all
rights
reserved
by
FBC
