![MW TOOLS 724574222 Manual Download Page 20](http://html.mh-extra.com/html/mw-tools/724574222/724574222_manual_1861060020.webp)
20
POAD230 - NLFREN - v1.0 - 16032017
EN
TOOLS
3.2 Technical data
Model
POAD230
Dimensions (length x depth x height) 234 x 155 x 190 mm
Net weight AC pump
6.5 kg
Net weight DC pump
5.5 kg
Voltage
230 V
Frequency
50/60 Hz
Power
400 W
Absorption
2 A
Revolutions
2900 rpm
Operating temperature
-5 - +40 °C / +23 - +104 °F
Q-max
10.5 gpm / 40 l/min
P-max
50.75 psi / 3.5 bar
Protection
IP55
3.3 Intended use
The dispensing system was designed and built for the distribution of the product called AdBlue®, AUS32 or water.
The dispensing system should be used by observing the following conditions:
• Maximum temperature of dispensed product: +35 °C
• Minimum temperature of dispensed product: -11 °C
• Maximum temperature of dispensed product permitted by materials: +40 °C
• Voltage variation permitted: +/- 5%
• Equivalent continuous sound pressure level at the workstation: ~75 dB(A)
• Make sure that the pump operates within its nominal operating parameters
WARNING!
• The system was not designed for dispensing of diesel, petrol, flammable liquids with flash
point
< 55 °C/131 °F, or for operation in environments with potentially explosive atmosphere. The
use in the above mentioned conditions is forbidden.
• The use of the system for purposes different from those specified in “Intended use” is strictly
forbidden.
Do not operate the system for any purpose other than the purpose described within this manual. All other use is considered
improper and will result in the manufacturer disclaiming any responsibility for damage to property, people, animals or to the
system itself.
WARNING!
Do not keep the pump in motion with the nozzle in the closed position for more than 3 minutes.
4 Installation
• The dispensing system has been designed and equipped for IBC/TOTE tank installation. Any different form of installation
must guarantee secure fastening.
• All installations must be carried out by competent personnel. Authorized persons must:
- Install the system in dry and well-ventilated place,
- Ensure the correct installation of equipment required for the correct functioning of the pump,
- Only use accessories that have been supplied with the system.
copyrighted
document
- all
rights
reserved
by
FBC