mvt TANGO hp-1, Operating Instructions And Safety Instructions, Page: 8 / 14

Operating Instructions, Rotary
Nozzle
TANGO hp - 1
Op Instrs
As at 09.01.2020
8/14
Copyright © 2020 mvt AG, Port, Switzerland
3 Technical data
3.1 Features of the TANGO hp-1

Unique seal (patent applied for); this does away with the usual need to change sealing
systems.

Rotating shaft supported radially and axially by bearings on both sides makes for
maximum robustness
–
perfect for operating in a harsh environment.

So that material removal is achieved as effectively as possible, two nozzles are aligned
clockwise (Drive +) and two counter-clockwise (Brake -).

The maximum volume flow at 3000 is 75 litres/minute. Beware of the recoil force!

Important: identical-size nozzles must
always be inserted
diagonally opposite
each other in order to prevent any
imbalance occurring during rotation (risk
of injury).
Technical data

Operating pressure:
1,500
–
3,000 bar

Volume flow: max. 75 L/Min. in accordance
with nozzle selection table 3.2

Rotational speed: approx. 500
–
4000 rpm.

Dimensions: Ø40 x 180 mm

Weight: approx. 1.2 Kg

Nozzle type: mvt 964 / 965 (Saphir) with or
without jet smoothing insert

Brake: eddy current brake

Operating temperature: max. 100°C in
continuous operation

Max. rotational speed: 8500 rpm.

Connection thread: M14x1.5 LH or 9/16"-18
UNF
Structure of the rotary nozzle
1. Housing
2. M26 pressure screw
3. Pressure ring M14x1.5 LH or 9/16
“
-18 UNF
4. Nozzle head
5. Nozzles