MVP TALON Gun, Manual

Page: 7 / 78

Talon Internal Mix Gun Manual
Rev. 01/2015 Page | 7
Type of Fire Extinguishing equipment recommended: Fire Extinguisher – code ABC, rating
number 4a60bc.
Extinguishing Media – Foam, Carbon Dioxide, Dry Chemical, Water Fog.
Copies of the above bulletins are available, at a nominal charge from:
National Fire Protection Association
470 Atlantic Avenue
Boston, MA 02210
Research Report No.11 of the American Insurance Association deal with “Fire, Explosion and
Health Hazards of Organic Peroxides”. It is published by:
American Insurance Association
85 John Street
New York, NY 10038
Local codes and authorities also have standards to be followed in the operation of your spraying
equipment. Your insurance carrier will be helpful in answering questions that arise in your
development of safe procedures.
1.2 Personal Safety Equipment
Magnum Venus Products recommends the following Personal Safety Equipment for conducting
safe operations of the Polyester Systems:
Magnum Venus Products recommends that the user consult the state and local regulations
established for all Safety equipment listed.
2.0 Material Safety
2.1 Hazards Associated with Laminating Operations
The major hazards which should be guarded against in polyester laminating operations are
those associated with:
1. The flammability and explosion dangers of the catalyst normally used – Methyl Ethyl Ketone
Peroxide (MEKP).
2. The flammability dangers of clean-up solvents sometimes used (Magnum Venus Products
recommends that clean-up solvents be non-flammable), and of resin diluents used, such as
styrene.
3. The flammability dangers of catalyst diluents, if used. (Magnum Venus Products recommends
that catalyst not be diluted.
4. The flammability dangers of the uncured liquid resins used.
5. The combustibility dangers of the cured laminate, accumulations of over spray, and laminate
sandings.
6. The toxicity dangers of all the chemicals used in laminating operations with respect to
ingestion, inhalation and skin and eye hazards.