20
10. Reassemble in the reverse order.
※ Make sure to clean the product at least once a month.
1. Remove the air filter by sliding it to the left
,
remove
dust with a vacuum cleaner and wash with
lukewarm water(about
25
o
C
) or mild detergent.
Completely dry the filter before reinserting into the
grill.
[ How to clean air filter ]
Assemble the high water level sensor on the front as in the figure
s below
.
(Make sure that the top and bottom holes of the fixing clip are left open.)
Make sure that the extended part of the water distribution cover goes under
Caution
the opposite surface.
Fixing holes
Water
distribution
cover
Front grille
Air filter
※
Make sure to clean the filter at least once a month.
◆
Periodically clean the ice scoop.
◆
The scoop is easily contaminated during handling.
◆
Detergent may cause a burn.
◆
Do not force/induce vomiting when someone has swallowed the detergent.
◆
Make them drink a lot of water or milk and seek medical help immediately.
◆
Rinse off with water if detergent comes in to contact with skin.
◆
Store
detergent
away from
children.
Caution
Warning
Summary of Contents for Kool-It KCU-250-AH
Page 34: ...34 Memo ...
Page 35: ...35 Memo ...
