27
Menu Operations
2.
Menu Lock: If Menu Lock is set to “Yes” then you need to enter the
password every time you want to open the menu. If set to “No” then you
can open the menu without entering the password first.
3.
Channel Lock: If set to “Yes” then you need to enter the password before
you can see those channels which have been marked as locked channels
in the channel menu. If set to “No” then even those channels can be
selected without entering the password first.
4.
New Menu Password: Here you can change the existing password. You
should do this after you set up the receiver the first time and every time
when you think that your password is known by unauthorized persons. To
change the password enter the new password in the “New Menu
Password” item and repeat the same one in the “Confirm Password” item.
If the passwords are not identically then you will see a warning message. If
you entered the same new password in both fields then you will see the
message “Saving Data, Please Wait…”. From now on you need to use the
new password to open locked menus or locked channels.
NOTE: The default password is 0000.
5.
Basically the operation of “New Chan(channel) Password” is same as “New
Menu Password”.
6.
Press [Exit] to leave the “Parental Lock” menu.
5.5 Power setting
When you select this option, you will see a
screen like beside:
1.
Automatic Standby: press [OK] to
open the “Automatic Standby” menu.
Automatic Standby: Press
[Vol◄/►] to select “Off” and
“On”.
Time:
Press [Vol◄/►] to select
“1hr” ~ “8hr”.
