+44 (0)23 8052 8777
12
MV Heating UK Ltd
The heater is connected to the cooling system as shown
here:
Figure IV
1.
Equalising reservoir
2.
Thermostat
3.
Engine
4.
Circulation Pump
5.
Heater
6.
Heat exchanger
7.
Radiator
Always use the hoses provided. Ensure they are
installed without kinks and preferably installed uphill to
ensure better bleeding. Use hose clips to support the
hose connections to prevent them from slipping off.
Take care not to over tighten the clips. A torque setting
of 2.0+0.5 Nm is ideal. Secure hose clips on the heater
between the flared neck and the heater.
