Connection status display of the device in different modes.
3
Mode control knob
Switch between different functions by rotating or short pressing the knob.
(**Note: In different modes, you can reset the function corresponding to the current mode by long
pressing the mode knob for 5s)
Standard Bluetooth mode (
)
Fast flashing blue light: Ready for Bluetooth pairing
Steady blue light: Bluetooth connected
Bluetooth reset: Long press the mode knob for 5s
Bluetooth low latency mode(
: Low Latency)
The Bluetooth connection in this status is in low-latency mode, which can better ensure the
synchronization of sound and audio sources in the shortest time. This status is ideal for scenarios
including mobile games or audio and video entertainment and others.
(Note: In this mode, the game voice function can only run on the IOS system, and the product's
sound quality and Bluetooth transmission distance will be affected. It is recommended to select
standard
Bluetooth mode for daily use.)
Bluetooth TWS
mode
(
)
In this mode, two MUZEN devices of the same model are required. In TWS mode, in which two
devices are running simultaneously, device A and device B can form left and right channels of an
independent stereo speaker.
When using this function, turn on the Bluetooth TWS mode of device A and device B, the TWS
indicator of the two devices will flash (duration for 60s), and the two devices will be paired. After
pairing, the voice prompts will form left and right channel pairing. The TWS indicator light of
device A is now flashing, and that of device B is on. After device A is connected to the mobile
phone via Bluetooth, the TWS indicator light of device A will be on, signifying that the TWS
pairing has been completed.
If device A fails to pair with device B within 60s after the second flashing, please restart both
devices.
AUX
(
)
In this mode, the product can be connected to an external signal source (mobile phone, PC, etc.)
via the standard AUX cable. Rotate or short press the mode knob to enter AUX mode while using.
The indicator light turns orange at this point, and the signal source can be played.
(**Note: The product has a standby function. When powered on, if the Bluetooth is not connected,
the product will automatically enter the standby state after 10 minutes, and the product needs to be
switched on and off again to wake up. When powered on, if the Bluetooth has been connected, but
the track is not played, the product will automatically enter the standby state after 20 minutes, and
the product needs to be switched on and off again to wake up.)
4
Volume
control knob/key
Volume up: Rotate clockwise
Volume down: Rotate counterclockwise
