Panel Description
5
1.LEVEL Knob
Control the OUTPUT LEVEL or EFFECT
LEVEL or BALANCE of the selected effect.
2.CTL1/RATE Knob
Turn this knob to control RATE or 1st
parameter of the selected effects.
3.CTL2/DEPTH Knob
Turn this knob to control DEPTH or 2nd
parameter of the selected effects.
4.CTL3 Knob
Turn this knob to control 3rd parameter of the
selected effects.
5.MODE Knob
Select one modulation effect among the 15
effects, or to select the patch memory function.
6.PATCH MEMORY Buttons
Press any of the PATCH MEMORY buttons to
store your favorite tones to one of the four
patch memory buttons (When the “MODE”
knob on the M position is selected).
7.ON/OFF LED
Indicate the on/off status of the unit.
8.FOOT SWITCH
Press the switch to turn effects on and off or
for patch memory selection.
9.POWER Jack
Plug the 9V power adaptor into this jack.
10.INPUT Jack
Connect your guitar to this jack. Connect a
guitar cable to this jack for power supply
when using a battery.
11.OUTPUT Jack
OUT-L(MONO)
Connect this output jack to your guitar amplifier.
OUT-R
Connect this output jack to another amplifier.
Notice
：
You can also send this 2 combinational output
jack's stereo signal to amplifier, mixer, audio
interface, or another effect processor.
0
5
25
75
95
100
aw_FD800_Manual_G12_101118
2010
11
18
12:50:00
