MuxLab ProDigital 500790, Operation Manual

Page: 7 / 49

HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual
7
Step2.Connect the power on the rear panel of the camera, and the power LED on the front will
illuminate.
Step3. During the power On sequence the Pan-Tilt function rotates the camera to its maximum upper
right position, and then returns to the center position to complete the initialization process. (Note: if
there is an entry for position preset 0, the corresponding position preset 0 will be called up after
initialization.)
4. About Product
4.1 Features
⚫ Maximum resolution of 1920 x 1080 (Full HD) at 60Hz.
⚫ Supports a Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS
sensor.
⚫ Uses a 60.7° wide-angle high-quality lens.
⚫ Supports a 30x optical zoom, and up to 8x digital zoom.
⚫
Supports H.265 encoding, allowing Full HD 1080p video streaming to be streamed with
ultra-low bandwidth.
⚫ High SNR CMOS sensor combined with 2D & 3D noise reduction algorithm, effectively
reducing noise even under low light conditions.
⚫ Supports AAC audio encoding for better sound quality at a lower bandwidth.
⚫
Supports HDMI and 3G-SDI interfaces, effective transmission distance up to 150 meters
(under 1080P30). HDMI and SDI can output at the same time. It also supports CVBS
interface.
⚫ Support local USB disk storage without NVR.
⚫ Designed with worm gear drive for reliable and accurate movement.
⚫
May be remotely controlled via RS232 and IP.
⚫
Works as a standalone device.